What should be noted during the use of a hand cranked bed

Hand cranked beds are widely used in medical care, home care, and other scenarios. During their use, the following key points should be noted to ensure safety and functionality:
1、 Check before use
Structural integrity
Check if the bed body, guardrails, casters, and other components are secure and free from looseness or damage.
Confirm that the joystick or adjustment device operates smoothly without any jamming or abnormal noise.
Accessory inspection
Ensure that the mattress is flat and undamaged, and that anti slip pads, bedpans, and other accessories are complete and clean.
Environmental assessment
Adequate space should be reserved around the bed to avoid collision with obstacles or power cords.
2、 Adjust height and angle
Operating Standards
Slow adjustment: Avoid rapid rotation of the joystick to prevent severe shaking of the bed.
Step by step adjustment: The adjustment range should not be too large each time, and continue after observing the patient's reaction.
Angle restriction
Back angle: usually not exceeding 70 degrees; To prevent patients from slipping or compressing their breathing.
Leg angle: Adjust according to the patient's needs to avoid excessive bending that affects blood circulation.
Highly adaptable
Nursing height: Adjust to the waist position of the nursing staff to reduce the burden of bending over.
Patient height: Ensure that the patient's feet are flat on the ground to avoid discomfort caused by suspension.
3、 Patient Safety
Anti falling bed measures
When using guardrails, ensure that the locks are securely fastened to prevent patients from falling when turning over.
For patients with unclear consciousness or restlessness, it is necessary to add restraint straps or assign dedicated personnel for supervision.
Position comfort
Regularly check the patient's position to prevent pressure ulcers caused by local compression.
Use soft cushions or pillows to support the joints and avoid hanging in the air.
Emergency situation
Plan emergency access in advance to ensure that the bed can be quickly moved to a safe area.
4、 Daily maintenance
Cleaning and disinfection
Wipe the surface of the bed with a neutral cleaner and avoid using corrosive liquids.
Regularly lubricate components such as joysticks and casters to prevent rusting or jamming.
Accessories Management
Toilets, urinals and other accessories need to be cleaned and disinfected daily to prevent cross infection.
The mattress is regularly flipped to extend its lifespan.
Regular maintenance
Check the bed structure every month, tighten loose screws, and replace worn parts.
5、 Precautions for special groups
Postoperative patients
Adjust the angle according to medical advice to avoid affecting wound healing.
Avoid directly compressing the surgical site and use a pressure reducing pad to disperse the pressure.
Elderly people
The height of the bed should not be too low to prevent patients from falling when getting up.
Use small night lights at night to reduce accidents caused by insufficient lighting for patients.
Children
The height of the guardrail should exceed the shoulders of children to prevent climbing and falling.
Avoid placing toys or miscellaneous items by the bed to prevent accidental ingestion or tripping.