FAQ

April-29 2026

Core functions, classification, and selection of hospital emergency beds

In emergency medical scenarios, The emergency bed is an indispensable equipment for treating critically ill patients. Its design needs to meet the requirements of rapid response, convenient operation, and multi scenario adaptation, which directly affects rescue efficiency and patient safety. This article will comprehensively analyze the core value of emergency beds from the perspectives of functional characteristics, classification selection, and purchase points. 1. The core functional characteristics of the emergency bed 1. Scientific structural design Rescue beds usually adopt modular design to meet the needs of first aid and surgery. The bed surface can be flexibly adjusted to facilitate the implementation of cardiopulmonary resuscitation, intubation and other operations. Some models support half or full flip function, providing convenience for position drainage and back care. 2. Efficient security protection The bed is equipped with a moderately high guardrail, which can prevent patients from falling and also prevent medical staff from getting injured due to items slipping during operation. Install a stable brake at the bottom to ensure flexible steering when moving and no risk of tilting the bed when stationary. 3. Convenient cleaning management T...

April-18 2026

Maintenance and upkeep of transfer beds

Maintenance and upkeep of transfer beds 1. Regular cleaning Use mild cleaning agents and soft cloths to regularly clean the surface and accessories of the transfer bed, avoiding the use of highly corrosive cleaning agents. 2. Inspection and fastening Regularly inspect the various components of the transfer bed for looseness or damage, and promptly tighten or replace damaged parts. 3. Lubrication and maintenance Regularly lubricate and maintain the electric drive system of the electric transfer bed to ensure its normal operation. 4. Storage and Protection When not in use, store the transfer bed in a dry and ventilated place, avoiding direct sunlight and humid environments. At the same time, pay attention to protecting the bed surface and accessories of the transport bed to avoid scratches and collisions. ...

April-18 2026

Can you explain what a transfer bed is

A transfer bed is a specialized medical bed used for transferring patients between beds, as well as transporting patients from the operating table to the ward and from the ambulance. The use of transfer vehicles has solved the difficulty for patients to move from the operating table to the ward after surgery, reducing the pain and difficulties caused by traditional manual transfer of patients. It is used in major hospitals and is an essential medical equipment for hospitals. Mainly used in hospitals. A specialized medical bed for transporting and rescuing patients. The transfer bed has the characteristics of multi position lifting, flexible movement, and convenient operation, which changes the traditional way of transferring patients and makes the process of transferring patients convenient and fast, reducing the difficulty and pain of doctors and nurses transferring patients. ...

April-17 2026

What application scenarios is the rescue bed suitable for

As a core equipment in the medical emergency system, the rescue bed is designed to balance multifunctionality, stability, and mobility, and is applied in the following scenarios: 1. Emergency Department (ED) Acute patient rescue Application scenarios: Patients with acute myocardial infarction, stroke, traumatic shock, etc. require immediate life support. Core functional requirements: Quick lifting: In conjunction with cardiopulmonary resuscitation (CPR), the bed height should be adjustable within the range of 50-90cm. X-ray fluoroscopy function: The bed board is made of carbon fiber material and compatible with C-arm devices, quickly eliminating complications such as pneumothorax and fractures. Triage and transportation Application scenario: When patients are transported from the ambulance to the emergency room, they need to maintain a stable position. Core functional requirements: Central braking system: braking distance of 5cm to ensure safe transportation. Guardrail and restraint system: Four side adjustable guardrails to prevent patients from falling off the bed. 2. Intensive Care Unit (ICU) Long term monitoring and care Application scenario: Severe patients need to stay in bed for a long time and frequently adjust their overall position to prevent complications. ...

April-17 2026

How to clean the emergency bed

The cleaning of emergency beds should take into account the safety and cleaning standards of medical equipment. The following are step-by-step cleaning methods and precautions: 1、 Preparation before cleaning Power outage and protection Ensure that the power supply of the emergency bed has been cut off to prevent electrical components from entering the water. Wear protective equipment such as gloves and masks to prevent cross infection. Remove detachable components Remove the mattress, guardrail, infusion stand, urine bag hook and other accessories, and clean them separately. 2、 Surface cleaning Daily cleaning Tools: Neutral cleaner, soft cloth, disinfectant wipes. Method: Dip a soft cloth into the cleaning agent and wipe the surface of the bed frame, bed board, guardrail, etc. Focus on cleaning areas with frequent contact (such as handrails, buttons). Deep cleaning Tools: Medical disinfectants (such as chlorine containing disinfectants), brushes, high-pressure water guns (if necessary). Method: For stubborn stains, use a brush dipped in disinfectant to gently brush. The gaps in the bed can be rinsed with high-pressure water guns (ensuring that the equipment is waterproof). 3、 Component cleaning Mattress Material differentiation: Sponge/Memory Cotton: Wipe...

April-16 2026

How to clean an electric bed

The cleaning of electric beds should balance functionality and safety, avoiding motor water ingress or structural damage. The following is a cleaning guide by region and material: 1、 Cleaning of functional components 1. Motor and Controller Cleaning method: Wipe the surface dust with a dry cloth and avoid using liquid cleaning agents. Protective measures: If the controller gets wet, immediately turn off the power and dry it with a dry cloth. Let it stand for 24 hours before use. 2. Bed gap Tool selection: Use a cotton swab or soft bristled brush to clean the gaps in the bed frame and avoid dust accumulation. Key areas: The active joints at the head and tail of the bed need to be regularly cleaned to prevent abnormal noise. 2、 Special function cleaning 1. Massage function Cleaning cycle: once a week. Operation method: Wipe the surface of the massage head with a slightly damp cloth to prevent moisture from entering the internal motor. 2. Lift function Check lubrication: After cleaning, apply a small amount of lubricating oil (such as sewing machine oil) to the lifting track to reduce friction noise. 3. Safety precautions Do not wash with water: Electronic components such as motors and controllers must not come into contact with moisture. Avoid high temperatures: Do n...

April-16 2026

Where else can a hand cranked bed be used besides in hospitals

Hand cranked beds can also be applied in the following fields besides hospitals: 1. Elderly care institutions and home care Assist in getting up and adjusting posture: The hand cranked bed manually adjusts the height of the head and tail of the bed, helping the elderly or those with limited mobility to easily sit up and turn over, reducing the burden on nursing staff. Preventing bedsores: Regularly adjusting the angle can relieve body pressure and reduce skin problems caused by long-term bed rest. 2. Rehabilitation Center Physical therapy assistance: used for patient posture adjustment, position drainage, and joint activity training to promote blood circulation and rehabilitation process. Safety protection: Some hand cranked beds are equipped with guardrails to prevent patients from falling, especially suitable for semi disabled individuals. 3. Family scene Daily use: As a regular bedding, the manual adjustment function can meet different needs such as reading and resting. Emergency backup: In case of power outage or electric bed failure, a hand cranked bed can be used as a temporary alternative solution. 4. Special transportation Aviation and ships: equipped with seat devices similar to hand cranked beds to ensure comfortable rest for passengers during long-distance travel ...

April-15 2026

Suggestions for choosing a transfer bed

Suggestions for purchasing transfer beds 1. Select type according to requirements Select the appropriate type of transfer bed based on the specific needs and budget of the medical institution. 2. Consider safety and comfort Ensure that the transfer bed has comprehensive safety protection measures and a comfortable mattress design. 3. Focus on convenience and durability Choose a transfer bed that is easy to operate, clean, and maintain, while considering its durability and service life. 4. Consider intelligence and integration For medical institutions with conditions, they can consider purchasing transfer beds with intelligent and integrated functions to improve work efficiency and management level. ...

April-15 2026

What should be noted during the use of a hand cranked bed

Hand cranked beds are widely used in medical care, home care, and other scenarios. During their use, the following key points should be noted to ensure safety and functionality: 1、 Check before use Structural integrity Check if the bed body, guardrails, casters, and other components are secure and free from looseness or damage. Confirm that the joystick or adjustment device operates smoothly without any jamming or abnormal noise. Accessory inspection Ensure that the mattress is flat and undamaged, and that anti slip pads, bedpans, and other accessories are complete and clean. Environmental assessment Adequate space should be reserved around the bed to avoid collision with obstacles or power cords. 2、 Adjust height and angle Operating Standards Slow adjustment: Avoid rapid rotation of the joystick to prevent severe shaking of the bed. Step by step adjustment: The adjustment range should not be too large each time, and continue after observing the patient's reaction. Angle restriction Back angle: usually not exceeding 70 degrees; To prevent patients from slipping or compressing their breathing. Leg angle: Adjust according to the patient's needs to avoid excessive bending that affects blood circulation. Highly adaptable Nursing height: Adjust to the waist po...

April-15 2026

Can you briefly explain the transfer bed

A transfer bed is a specialized medical bed used for transferring patients between beds, as well as transporting patients from the operating table to the ward and from the ambulance. The use of transfer vehicles has solved the difficulty for patients to move from the operating table to the ward after surgery, reducing the pain and difficulties caused by traditional manual transfer of patients. It is used in major hospitals and is an essential medical equipment for hospitals. ...